Unicycling

Unicycling is one of my favorite activities — especially mountain unicycling or road riding in the hills by my house. I learned to unicycle in April 2004 when I got my first one: a cromo steel Kris Holm 24″ mountain uni.

I was the previous 2010 Unicycle Marathon World Champion! The course was really suited to my riding style. In 2012, I attended UNICON and got 3rd in each of the marathon, 10km and 100km races. The cool thing about the 100km race is that I was one of the only people to do it nonstop, with zero dismounts or falls.. At the North American Unicycle Nationals in 2010 (called UGames), I also won the Downhill Mountain Unicycling race, and Marathon race. I placed second in the 10km and time trial races (behind the super-fast Chuck Edwall) and 3rd in Mountain Uni Cross Country.

I have a lot of unicycles and primary ride my Kris Holm geared 36″ road uni and 24″ geared mountain unicycle. I also have a geared 26″ muni. The geared hub is a planetary system that gives two speeds, and are from Schlumpf Innovations.

In 2013 I built my own big 36″ unicycle to ride, called the Corbin V-36.

In April 2017 I rode the Arizona Trail on my unicycle. Check out all the posts: Arizona Trail on Unicycle.

In 2015 I rode my unicycle through the Himalayan mountains of Nepal.

In 2020, I did some filming work for xfinity mobile and appeared in their commercial and website. https://ispot.tv/a/nmAL

Listed below are various posts about unicycling (this is my “Unicycling” category on the left”).

no_thumbnail

Down a really steep hill

Tom Holub took this great picture from last weekend: It was soo steep that I almost thought twice about doing it.
Unicycling

Corbin V-36 + Motorcycle

Did a little motorcycle ride up to Folsom (past Sacramento, about 2.5 hours from my house), and rode my unicycle with a bunch of friends.
Unicycling

Corbin V36 – Painted

The frame, painted: All together, but with the seat angle too high:
Unicycling

Corbin V-36 mod 2

I finally got some more metal and time to work on my V36 unicycle frame. I removed a triangle support that I had added to try to reduce flex, and brazed on another tube that... [read more]
Unicycling

Corbin V-36

I’m working on a V-Frame 36’er unicycle, called the “Corbin V-36“. It’s partially an experiment to see how light I can make it, yet still be strong and not flex. I did a 3d model... [read more]
Machining, Unicycling

Photography: Uni up the pass

Uni up the pass, Switzerland 2012
Photography, Unicycling

Photography: San Francisco Unicycle Tour 2012

Nathan and Aaron in the Sun
Photography, Unicycling
no_thumbnail

Cyr Wheel Performance at Berkeley Juggling and Unicycle Festival

Here’s my act I made up. Thanks to Jay for filming it!
Circus/Cyr Wheel, Unicycling

Nathan’s Unicycle

Nathan’s Unicycle July 2012. Nathan’s yellow KH 36 geared unicycle. 7 exposure HDR.
Photography, Unicycling

Alps Unicyclists

There are three mad unicyclists on the mini-Swiss unicycle tour I’m doing. Me, Scott and Nathan Hoover. Unfortunately, I don’t have a good picture of Nathan yet, but here’s a few cool ones. Myself (Corbin)... [read more]
Photography, Unicycling

Handegg to Andermatt

Still unicycling! We rode from Handegg to Andermatt today. Only 32 miles but we went over Furka pass and Grimsel Pass; that was a bit of climbing! We were averaging like 5mph up the hills,... [read more]
Photography, Unicycling

Grindelwald to Handegg

Today we rode “only” 30 miles, but it was almost all uphill from Grindelwald to Handegg Switzerland. I didn’t bring the DSLR with me, since it was raining on and off. The start of the... [read more]
Photography, Unicycling

As an Amazon Associate I earn from qualifying purchases.

(c) 2008-2020 Corbin Dunn

Privacy Policy

Subscribe to RSS feeds for entries.

57 queries. 0.465 seconds.

Log in