![\"\"](\"https:\/\/www.corbinstreehouse.com\/blog\/wp-content\/uploads\/2023\/11\/Hex-Inlay-Wod-Salad-Bowl-DSC01427-Edit-scaled.jpg\")
<\/a><\/figure>\n\n\n\nWatch the video build: Hex Inlay Salad Bowl – My Hardest CNC Project<\/a><\/p>\n\n\n\n My last hexagonal salad bowl<\/a> was made with epoxy and cherry wood. I laminated up a bunch of pieces of cherry and machined out the bowl. I got to thinking about how I could more wisely use the wood, and I decided that laying the pieces up at an angle would allow me to start with a hollow shape. The hex shape with somewhat flat sides kind of lends itself nicely to this process. But, that led me to more thinking: If my pieces are somewhat flat, then I could make a deep inlay and have it show up on both sides. <\/p>\n\n\n\n This seemed like a great idea, but it led me down a rabbit hole for how to get good inlays. And by good, I mean really tight inlays without any gaps. It wouldn’t be too hard to make an inlay with a large tolerance and have it easily work, or to fill it in with some wood filler. I wanted it to be *perfect*. <\/p>\n\n\n\n I had to do a lot of tests to figure out how to get things to work right. This involved cracking a lot of sample pieces of wood. I also burned some of my cherry pieces — not enough to start a fire, but enough to leave burn marks while machining. As I went along I broke one of my bits. I also had to re-think the entire process a few times, which led me to want to just give up.<\/p>\n\n\n\n Ultimately, I persisted, and I made three bowls. The first one was a sample bowl, made out of some of the pieces that cracked a bit. I didn’t like how the bottom turned out, so I redesigned how I could make the thing to make the wood grain flow better.<\/p>\n\n\n\n Two turned out fabulous. One will be a gift, and the other is for sale: Hex Inlay Bowl For Sale<\/a> on Corbin’s Workshop.<\/p>\n\n\n\n<\/a><\/figure>\n\n\n\n<\/a><\/figure>\n\n\n\n<\/a><\/figure>\n\n\n\n<\/a><\/figure>\n","protected":false},"excerpt":{"rendered":"