Plug Bug: Interior Out and Rust in Back

Electric Bug

The project is slowly moving along. I’m working on restoring the car and took most exterior stuff off in preparation for body repair and paint.

IMG_8725.jpg

I’m planning on upgrading to disc brakes and lowered spindles to drop the front a little bit.

I’ve been taking a lot of pictures as I go; mainly so I can remember how it all goes back together!

IMG_8499.jpg

The worst amount of rust is the luggage compartment behind the back seat. After I pulled the carpet away I noticed there were holes rusted through. I’m planning on building battery boxes here, and instead of ordering a new panel (only about $200) I’m going to weld in some sheet steel and cut out the rusty part:

IMG_8509.jpg

IMG_8511.jpg

I originally was going to cut pieces out, but I think one big piece will be easier.

IMG_8611.jpg

The floor pan has a little bit of rust that I cleaned up with some sander wheels on the grinder. It doesn’t seem bad enough to warrant replacement — there aren’t any holes, and it doesn’t have any signs of rusting through. That’s good news, as I didn’t want to have to deal with replacing it.

IMG_8622.jpg

I’m a little behind on the blog. This is what it looked like a few days ago.

IMG_8634.jpg

Tags:


Subscribe
Notify of
guest

1 Comment
Inline Feedbacks
View all comments
Jason H

I like the no-fenders look! Maybe Suzy and your plug-bug could swap? Let’s put a spoiler on the plug-bug while we’re at it!

Subscribe to new posts:

You'll get an email whenever a I publish a new post to my blog and nothing more. -- Corbin

As an Amazon Associate I earn from qualifying purchases.

(c) 2008-2024 Corbin Dunn

Privacy Policy

Subscribe to RSS feeds for entries.

67 queries. 0.130 seconds.

Log in