Corbin's Treehouse - Corbin Dunn, Santa Cruz, CA
Plug Bug
Treehouse
Photography
Videos
Projects
Unicycling
About

Kitchen Cabinets: Introduction and Sketchup


I’m remodeling my kitchen and building new cabinets out of alder wood. I like to remember what I did, so I’ll write up some details for the next wood working project I tackle. 

The first thing I did was to use Sketchup to design a 3D model of the current kitchen. This involved taking physical measurements of the room and creating a model of roughly where things were located. Then I started to fill in rough sizes of cabinets as boxes and worked on the face frame design. Here’s one of the first rough renderings I did:

Kitchen v5 2018 03 14 08120200000

 

I decided to come up with the face frame design before I filled in all the cabinets. I created various designs and did some renderings to figure out what Lexi and I liked the best. I played around with traditional face frame design, and inset cabinets. I didn’t like the Euro style and wanted to do something a little nicer and more detailed than face frame, so I settled on a combination of face frame and inset cabinets.

Kitchen v5 2018 03 14 14333700000

 

Below: an inset design on the left, and the same thing as a face frame:

Kitchen v5 2018 03 17 20490400000

 

Here’s what I settled on for the design:

Kitchen v5 2018 03 18 19275700000 shadows on

 

I played around with different textures to lighten up the design a bit, and filled in all the rest of the model:

Kitchen v17 2018 04 29 20023000000

 

This concept took me a few months to do, and some things I’ll tweak along the way, but this is it!




(c) 2008-2017 Corbin Dunn

Corbin's Treehouse is powered by WordPress. Made on a Mac.

Subscribe to RSS feeds for entries and comments.

35 queries. 0.434 seconds.